Width:
Frame width (o/s to o/s of Downrigger Pads) = 6’ – 4” (1.93m)
Front Tires (o/s to o/s) width = 5’ – 5” (1.65m)

Length:
Boom arm retracted = 14’ – 4” (4.4m)
Boom arm extended = 30’ – 8” (9.35m)

Height:
Top of fiberglass hood = 4’ – 0” (1.2m) (machine sitting in down position)
Top of Muffler (highest point) = 5’ – 2” (1.6m) (machine sitting in down position)

Weight:
4,380 lbs (1,986 kgs) nominal with fluids (without Screed Head attached)

Boom
Extension distance = 16’ (4.9m)

Screed Head:
Auger/Plow Head = 12’6″ (3.8m). Weight = 260 lbs (118 kgs)

Screed Coverage:
200 square feet/pass (18.6m2) per pass.

Leveling Systems:
Automatic Laser Leveling – activate the wireless control button and the machine automatically adjusts the screed head at a rate of 10 times/second.
Manual Leveling (wet screed) – 3 Hydraulic down riggers independently controlled with wireless radio.

Electrical System:
FCC/EC approved Wireless Transmitter and Receiver with backup cable control. 12 VDC operating system. Sealed Calcium/Calcium Automotive Battery. Electronics Control Center with centralized fuse and relay panel.

Engine:
Kubota D902 series, 3-cylinder, liquid cooled, 25 HP diesel motor. Tier 4, Stage IIIA compliant. Includes electric start, high capacity alternator and Lofa Diagnostics control panel.

Fuel System:
Diesel fuel – 8 Gallon (30L) holding tank (TPM 40 CFR Part 1039 Section 625 and CCR 2423(d) compliant).

Drive System:
Front wheel drive hydraulic piston motors with wireless control.
Rear wheel hydraulic steering with wireless control.
90o pivoting undercarriage drive frame for parallel to the pour driving

Tires/Wheels:
4 wheel/tire combination. Tires – Carlisle 6 ply Trac Chief – 28/8.50 x 15.

Hydraulic System:
Open loop with Master Manifold control. Fan cooled radiator.
Fluid level, temperature and pressure gauges.
Dual filtration system = In line filter + Magnetic suction pump.

Hydraulic Fluid:
20 Gallon (75L) capacity. ISO32 hydraulic fluid.